Android TV Box Rockchip SoC Firmware Update Guide

Android TV Box Rockchip SoC Firmware Update Guide

Today we present a tutorial to update, recover or unbrick with a firmware file our Android TV-Box with SoC Rockchip like RK3066 / RK3368 / RK3228 / RK3229 / RK3328 / RK3399 in a simple way, we will need a PC for this firmware update procedure.

  • FIND A FIRMWARE: You can use the search of our web, if we do not have it published we don’t have it, ask to your shop
  • NOTE: AndroidPCtv is not responsible for problems that may cause a firmware change.

SELECT UPDATE METHOD

  • Method 1-A = I have a single file with .img extension (you don’t need to connect the TV-Box to a PC)
  • Method 1-B = I have a single file with .img extension (you need to connect the TV-Box to a PC)
  • Method 2 = I have a single file with .zip extension you don’t need to connect the TV-Box to a PC)

! ATTENTION !

  • If the TV Box works well for our needs DO NOT UPDATE
  • If we don’t know what we are doing DO NOT UPDATE
  • If our TV-Box don’t work and does’t have reset button DO NOT TRY TO UPDATE , claim to the store.
  • Disconnect any other Android device that we have connected.
  • You always have to use a USB 2.0 connector (higher compatibility).
  • There are many TV-Boxes especially the cheap ones that are copies called ” clones ” that are incompatible with the official roms of the original models and can leave useless our TV Box or do not work the WIFI. It is impossible to know if we have a clone or not without opening the device and comparing it with another original. We recommend buying devices in the stores we recommend and if possible only known models from trusted brands.
  • If you do not find firmware for your model you may not have any brand support.

FLASH FIRMWARE WITH IMG FILE AND A SD CARD

  • Method 1-A = I have a single file with .img extension (you don’t need to connect the TV-Box to a PC)

Requirements

  • Read the first point of this guide
  • Download drivers Rockchip Create Upgrade v1.46
  • PC with Windows 7, 8 or 10.
  • MicroSD or SD card reader
  • SD card formatted in FAT32

SD card creation notes

  • If the method does not work with one card try another, some may be not compatible
  • You always have to run the program as ADMINISTRATOR
  • If this process does not work use method 1-B of this same guide

Prepare SD card to update TV-Box with SoC Rockchip

  1. Unzip the Rockchip Create Upgrade v1.46
  2. Locate where you have the firmware file in * .img format
  3. We start the Rockchip Create Upgrade program as the ADMINISTRATOR (right click on “SD_Firmware_Tool.exe”)
    In the program we select:
    – Drive where we have connected the SD card
    – Activate the SD BOOT option in the program menu
    – Path where we have the IMG file
    android tv box Rockchip Create Upgrade Disk Tool
  4. Press the RESTORE button and the process of creating the SD card will start, it may take several minutes.
  5. With the TV-Box turned off introduce the SD card.
  6. Keep the reset button pressed and without releasing it we connect the TV-Box to the electricity to boot it.android tv box reset button
  7. Automatically the update process will start, we must have patience it can take several minutes.
  8. To the terminal the process remove the SD card.
  9. We recommend doing a factory reset when Android boot: Settings> Backup> Reset

FLASH FIRMWARE WITH IMG FILE USING A PC

  • Method 1-B = I have a single file with .img extension (you need to connect the TV-Box to a PC)

Requirements

Connection notes

  • Each TV-Box has a specific PC connection port.
    We have to test the flash process with all ports, USB, microUSB or USB Type-C.
  • If our PC does not detect the TV-Box we recommend using another PC
  • We may have problems with our PC if we have previously installed another program to update an Android mobile phone or other similar device.
  • If one method gives you an error try the next one.

Installing Rockchip Drivers

  1. Start the program for the Rockchip Drivers “driverinstall.exe” (execute like Administrator with right button of the mouse in Windows), press in Installrk3368 android tv box update
  2. In the Windows security message click on Install
    android tv box rockchip update firmware
  3. Close the drivers program
  4. Reboot the PC

1-B-1 Update Procedure for a TV-Box with RK Batch Tool

    1. Disconnect the power cord on the Rockchip TV-Box
    2. Start the program RK Batch Tool with the “RKBatchTool.exe
    3. Click on the Firmware button “…”
    4. Select the Firmware file with extension “. img “and will be loaded on the screen.
      smart android tv box rockchip update
    5. Hold the reset button on the device and connect with a correct USB cable on our PC (buy it at Aliexpress or Contact US)H96 android tv box reset button
    6. The update program will detect the device almost instantly in one USB position (In the TV-Box we will have the black screen, if it enters the recovery is NOT correct)
      H96 android tv box rockchip update
    7. Select the RESTORE option and begin the update process
      rockchip update android tv box
    8. When finished, a green message will appear.
      rockchip update smart android tv box
    9. Wait for the system to restart and show us the Android desktop, this can take about 5 to 10 minutes.

 

1-B-2 Update using a PC for TV-Box with Factorytool

  1. Disconnect the Rockchip device from the power and run Factorytool v1.6
  2. First we upload the firmware in IMG format (1) and change to Restore mode (2)
    android tv box rockchip flash tutorial
  3. Hold the reset button on the device and connect with a correct USB cable on our PC (buy it at Aliexpress or Contact US )
    H96 android tv box reset button
  4. The update program will detect the device almost instantly in one USB position (In the TV-Box we will have the black screen, if it enters the recovery is NOT correct)
  5. Click on the RUN button (3), at the end it will give us OK.
  6. Wait for the system to restart and show us the Android desktop, this can take from 5 to 10 minutes approximately.

1-B-3 Update using a PC for TV-Box with RKDevTool

  1. Disconnect the Rockchip device from the power and run RKDevtool executing AndroidTool.exe.
  2. Change to the Upgrade Firmware section.
    H96 android tv box RKDEVtool frimware update
  3. First load the firmware with *.img file.
  4. Hold the reset button on the device and connect with a cable from a USB of our TV-Box to a USB port on our PC (* See the previous connection notes if we have questions).
    wifi android tv box reset-button
  5. The update program will detect the device (In the TV-Box we will have the black screen, if it enters the recovery is NOT correct).
  6. Press Upgrade button and wait to complete the operation.

UPDATE ONLY WITH ZIP FILE

  • Method 2 = I have a single file with .zip extension you don’t need to connect the TV-Box to a PC)
    1. Copy in the root of our SD or USB the .zip file of the update (depends on the TV-Box one or the other is used, try both)
    2. From the Android system of our TV-Box we go to Settings, depending on the model we have one option or another, examples:
      – Application update in the list of apps
      – Settings> About the device> Update
      – Some TV-Box with the Zip in the root of the SD or USB with the flash button pressed when starting take the update
    3. When you ask for the zip file, we select it and click on load
    4. The update process will begin on restart
    5. Once finished we recommend doing a factory reset inside Settings> Backup

IMPOSSIBLE TO RECOVER THE TV-BOX

If our TV-Box is not recovered by any flash method we may be trying to update in the wrong way, it is advisable to repeat the previous instructions step by step, if it still does not recover we recommend reading the following guide.

All comments

Leave a Reply