H96 tv box RK3229 update firmware refresh detailed steps
By Sales TV Box
Before the H96 is refreshed, prepare a double male USB cable and a slender hard object such as a card pin or toothpick. In addition, it is more important that the home network environment must be able to access the Internet scientifically, otherwise it is impossible to enter the system after brushing the machine, remember! Remember! Remember!
1.Install the download software and firmware on the Baidu network disk to the computer.
2.After decompressing the refresh tool compression package, first install the DriverAssitant_v4.5 driver on the computer.
3.After decompressing the refresh tool compression package, install the brush software FactoryTool_v1.6 to the desktop of the computer
4.Open the installed refresh software, the upper left corner can modify the language, see the arrow below the logo location
5.Click the firmware button in the upper left corner to import the downloaded firmware.
6.After the firmware is imported, wait for the import to succeed, click the start button, wait for the box to connect.
7.Connect one end of the dual male USB cable to the computer first, and the other end to the USB port next to SPDIF on the H96. Be sure to remember to insert the USB port near the logo. Only this USB port can be used for wire brush operation. The USB port is a low speed port and the brush machine is likely to fail.
8.After the normal connection, you can use the card pin to hold the rest hole, then insert the USB cable
9.Hold the RESET 3-5 seconds, the brush machine software appears after the brush machine progress, let go, the box automatically brush machine
10.The whole process of brushing is about 5 minutes, just wait patiently. After the brush software is successful, it will turn green and display the right side of the tool software, that is, the brush machine is completed. After the success, first click the stop button, then unplug the data line, the entire brushing process is completed.